OPTEK OPB200
The OPB200 contains an Infrared LED (890 nm) and a Phototransistor paired in a plastic housing. The housing is an opaque grade of injection-molded plastic, which minimizes the assembly’s sensitivity to visible and near-infrared radiation. Each device has approximately 0.060” [1.52 mm] diameter lenses providing the versatility necessary for general switching applications.OPB200 Specifications
- Mount Type : Through Hole
- Output Current : 30mA
- Forward Current : 50mA
- Collector Emitter Voltage : 30V
- Reverse Breakdown Voltage : 5V
- Forward Voltage : 1.7V
- Circuits : 1
- Power Dissipation : 100mW
- Max Operating Temp : 85°C
- Min Operating Temp : -25°C
Source:
Octopart
| Part No. | OPB200 |
|---|---|
| Datasheet | OPB200 Download |
| Manufacturer |  OPTEK |
| Description | Slotted Optical Switch |
| Buy | Stock & Price |
FEATURES
: x Housing material Opaque to visible and infrared light x Non–contact switching x Printed PCBoard mount x 0.200” (5.1 mm) slot width, 0.320” (8.1 mm) slot depth Product Photo HereDESCRIPTION
: The output Phototransistor ON state conducts current (IC(ON)) when no object is in the slot. The output switches to the OFF state when a device interrupts the light beam from the Emitter (LED) to the Phototransistor. The Phototransistor can acknowledge light between 400 nm and 1100 nm with optimum response in the 880 nm range. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information.APPLICATIONS
: x x x x x Non-contact interruptive object sensing Assembly line automation Machine automation Equipment security Machine safety 1 4 Pin # 1 2 3 4DESCRIPTION
Anode Cathode Collector Emitter 2 3 Ordering Information Part Number OPB200 LED Peak Wavelength 890 nm Sensor Transistor Slot Width / Depth 0.200” / 0.320” Aperture...
