OH-DY-01 Datasheet | OUZHUO

| HALL EFFECT SENOR IC | MAGNETIC SENSOR | OH Series Magnetic Pickup OH Series Magnetic Pickup is based on Hall effect or coil induction. They are used to measure the movement and speed of gear, crankshaft, rotating spokes on engines, such as diesel engines, gasoline engines, and steam turbines. Inductive Magnetic Pickup It can detect gear, crankshaft, rotating spokes, no need power supply, and without any excitation circuit from the control device. They can be equivalents of similar sensors from America WOODWARD. Part No. OH-DG-01 OH-DG-02 OH-DY-01 D M16- 1.5 M16- 1.5 5/8"-18BSW-2A E M16- 1.5 M16- 1.5 5/8"-18BSW-2B F 5/8"-24 BSW-2A 5/8"-24 BSW-2A 5/8"-24 BSW-2A G 8mm 8mm 3/8" LI 63.2mm 86.2mm 63.2mm L2 91.2mm 114.2mm 91.2mm Technical Parameters The detection distance (between the sensitive head and gear vertical distance range Diameter of gear Measuring range The output frequency Output voltage 0.25 ~ 1.02mm Working temperature -10 ~ +125 ℃ less than 0.51mm DC resistance 190 + 10Ω (25℃) 70 ~ 99999 rpm Anti-vibration 20g HZ= gear tooth number: - speed /60 1 ~ 30V sine wave signal (output voltage increases with speed, increasing the output voltage with the air gap increases, depending on gear relative to the output voltage waveform of sensitive head size and shape) Nanjing Ouzhuo Technology Co., Ltd Tel：86-25-52312738，83247886 Website: .zbling. Fax：86-25-52312738 E-mail: ouzhuo@zbling. .ohhallsensor. sale@ohhallsensor. | HALL EFFECT SENOR IC | MAGNETIC SENSOR | Hall effect Magnetic Pickup Part No. OH-HM-01 OH-HY-01 OH-HG-01 OH-HG-02 D 5/8 "-18 UNF-2A 5/8 "-18 BSF-2A M18- P1.0 M18- P1.0 E 5/8"-18 UNF-2B 5/8"-18 BSF-2B M18- P1.0 M18- P1.0 F 5/8"-24 BSW-2A 5/8"-24 BSW-2A 5/8"-24 BSW-2A 5/8"-24...