OM7500SM Datasheet | Omnirel

.. SURFACE MOUNT DUAL POSITIVE AND NEGATIVE FIXED VOLTAGE REGULATORS Dual 5V, 12V and 15V, 1.5 Amp Fixed Voltage Regulators In Isolated Hermetic Surface Mount Package Features - - - - - - - - Positive And Negative Regulators In One Package Hermetic 6-Pin Metal Package, Surface Mount Isolated Case Output Voltages: ±5V, ±12V, And ±15V Output Voltages Set Internally To ±2.0% Built-In Thermal Overload Protection Short Circuit Current Limiting Product Is Available Screened To MIL-PRF-38535, TX, TXV, S Levels DESCRIPTION This series of products offers a positive and a negative fixed voltage regulator in one hermetically sealed, 6-pin package whose outline is a surface mount type. With heat sinking, they can regulate over 1.5 Amp of output current per device. Standard voltages are + or - 5V, 12V, and 15V. Output voltages are intermally trimmed to ±2.0% of nominal voltage. These devices are ideally suited for military applications where small size and high reliability is required. To order, use the following Omnirel part numbers to determine the required output voltage of each regulator within one package. Omnirel Part Number OM7501SM OM7502SM OM7503SM OM7504SM OM7505SM OM7506SM OM7507SM OM7508SM OM7509SM Output Voltages Positive Negative +5V -5V +5V -12V +5V -15V +12V -5V +12V -12V +12V -15V +15V -5V +15V -12V +15V -15V 1 2 3 PIN CONNECTION - 6 5 4 Pin 1: +In Pin 2: mon Pin 3: -In Pin 4: -Out Pin 5: mon Pin 6: +Out 4 11 R1 Supersedes 2 07 R0 - 89 INDIVIDUAL POSITIVE REGULATORS ELECTRICAL CHARACTERISTICS +5 Volt Parameter Output Voltage Symbol VOUT VRLINE VIN = 10V, Io = 500m A, -55°C ≤ TA ≤ 125°C (unless otherwise specified) Min. 4.92 Max. 5.08 5.15 5 Unit V V m V m V m V m V m V m V m V m V m A m A m A Test Conditions TA = 25°C VIN = 7.5V to 20V Line Regulation (Note 1) VIN = 8.0V to 12V VIN = 7.5V to 20V - - - 4.85 12 4 10 12 Load Regulation (Note 1) VRLOAD IO = 5m A to 1.5 Amp - IO = 250m A to 750 m...