EE-SPX613 Datasheet | OMRON

.. An Ideal Photomicrosensor for Detecting Liquid Levels in Transparent Pipes Incorporates a Sensitivity Selector, Built-in Amplifier, and Operation Mode Selector Tie-wrap and rubber tube provided to prevent slippage Suitable for any 6- to 13-mm diameter transparent or semi-transparent pipe with a wall thickness of 1 mm Built-in amplifier saves space and wiring effort pact size is ideal for the miniaturization of equipment Uses a talc-free cable that is ideal for equipment used for the manufacturing of semiconductors Ordering Information Appearance Detection method Through-beam (with groove) Output configuration Dark-ON or light ON (selectable) Part number EE-SPX613 .. Specifications RATINGS/CHARACTERISTICS Part Number Power supply voltage Current consumption Applicable pipe Sensing object Control output Average value Peak value EE-SPX613 12 to 24 VDC ±10%, ripple (p-p): 5% max. 30 m A max. 80 m A max. Any 6- to 13-mm-diameter pipe with a wall thickness of 1 mm that is made of FEP or any other material as transparent as FEP. Liquids in pipes (High-viscosity liquids or liquids with floating materials may not be detected.) Voltage: Load current: Residual voltage: Indicator Connection method Enclosure rating Ambient illumination Light source Material Ambient temperature Ambient humidity y Vibration resistance Shock resistance Case Cover Operating Storage Operating Storage --10°C to 55°C (14°F to 131°F) --25°C to 65°C (-13°F to 149°F) (with no icing or condensation) 5% to 85% 5% to 95% (with no icing or condensation) Destruction: 10 to 500 Hz, 1.0-mm single amplitude or 150 m/s2 in X, Y, and Z directions 3 times and for 11 min each Destruction: 500 m/s2 in X, Y, and Z directions 3 times each 5 to 24 VDC 100 m A max. 0.8 V max. with a load current of 100 m A and 0.4 V max. with a load current of 40 m A Light indicator (red) (Lit with incident.) Pre-wired (cable length: 1 m) IEC IP50 3,000 x max. with incandescent...