G3MB Datasheet | OMRON

Solid State Relay Low cost Subminiature PCB mounting 2 amp Single in-line package (SIP) SSR - Bottom is approximately 3 times smaller than G3M. - Low cost “SIP” package switches up to 2A loads. - Built in Snubber circuit and input resistor as option. - Two footprints available for design flexibility. - The G3MB-202PEG-4-DC20MA crosses directly to the Motorola M0C2A-60 series power triac. .. Ordering Information To Order: Specify input voltage at end of part number. Example: G3MB-202P-DC24 Isolation Output terminal pitch 7.62 mm Zero cross Yes Input resistor Yes Built-in snubber circuit Yes Rated output load 2 A at 100 to 240 VAC Rated input voltage 5 VDC 12 VDC 24 VDC No 2 A at 100 to 240 VAC 5 VDC 12 VDC 24 VDC 5.08 mm Yes 2 A at 100 to 240 VAC 5 VDC 12 VDC 24 VDC No 2 A at 100 to 240 VAC 5 VDC 12 VDC 24 VDC Yes No No No 2 A at 100 to 240 VAC 2 A at 100 to 240 VAC N/A - (See Note) N/A - (See Note) G3MB-202PEG-4-DC20MA G3MB-202PLEG-4-DC20MA G3MB-202PL-4 G3MB-202P-4 G3MB-202PL Model Phototriac G3MB-202P Note: 1. For versions without input voltage specified, a current limiting resistor must be placed in series with the input. See LED drive specifications and remendations below. 2. TUV versions available. Contact your local Omron representative. Solid State Relay Specifications - Input Rating Models with Input Resistor Rated voltage 5 VDC 12 VDC 24 VDC 4 to 6 VDC 9.60 to 14.40 VDC 19.20 to 28.80 VDC Operating range 440 Ω ±20% 1k Ω ±20% 2.20k Ω ±20% Input impedance - Output Rating Model G3MB-202 .. Rated load voltage 100 to 240 VAC Load voltage range 75 to 264 VAC Load current 0.10 to 2 A Surge current 30 A (60 Hz, 1 cycle) - LED Drive Data Models without Input Resistor LED forward current Repetitive peak LED forward current LED reverse voltage 50 m A max. 1 A max. 5 V max. - Remended LED Operating Conditions Models without Input Resistor Min. LED forward current Must drop voltage 5 m A 0 10 m A - Standard 20 m...