Datasheet4U Logo Datasheet4U.com

NLAS6234 - Dual SPDT 0.5 Ohm Popless Analog Switch

Datasheet Summary

Description

suppression circuitry designed to prevent pass through of undesirable transient signals known as pops.

Features

  • ăPopless Noise Suppression Circuitry.
  • ăOVT up to +4.5 V on Control Pin.
  • ăRON < 0.5 W Across BCC Range, Typical.
  • ăTHD < 0.02 %, Typical.
  • ăOff Isolation = -70 dB, Typical.
  • ăCrosstalk Attenuation < -70 dB, Typical.
  • ăUltra Small, Thin Package: 1.4 mm x 1.8 mm UQFN10.
  • ăThis is a Pb-Free Device Typical.

📥 Download Datasheet

Datasheet preview – NLAS6234

Datasheet Details

Part number NLAS6234
Manufacturer ON Semiconductor
File Size 172.61 KB
Description Dual SPDT 0.5 Ohm Popless Analog Switch
Datasheet download datasheet NLAS6234 Datasheet
Additional preview pages of the NLAS6234 datasheet.

📁 Similar Datasheet

  • NLAS2750 - Low Voltage Dual SPDT Analog Switch (ON Semiconducto)
  • NLAS323 - Dual SPST Analog Switch (ON)
  • NLAS324 - Dual SPST Analog Switch (ON)
  • NLAS3699 - Dual DPDT Switch (ON)
  • NLAS4053 - Analog Multiplexer/Demultiplexer (ON)
  • NLAS4599 - Low Voltage Single Supply SPDT Analog Switch (ON)
  • NLAS4684 - Ultra-Low Resistance Dual SPDT Analog Switch (ON)
  • NLAST4051 - Analog Multiplexer/Demultiplexer (ON)
  • NLA9306 - Voltage-Level Translator (ON Semiconducto)
Other Datasheets by On Semiconductor
  • NLAS6233 - Dual SPDT 0.5 Ohm Popless Analog Switch
  • NLAS1053 - 2:1 Mux/Demux Analog Switches
  • NLAS2066 - Ultra-Small Dual Single Pole / Single Throw Analog Switch
  • NLAS3157 - Low Voltage SPDT Mux / Demux Analog Switch
  • NLAS3158 - Low Voltage Dual SPDT Analog Switch Dual 2:1 Multiplexer
  • NLAS325 - Dual SPST Analog Switch
  • NLAS3257 - Low Voltage SPDT Mux / Demux Analog Switch
  • NLAS3257A - Mux / Demux Analog Switch

Full PDF Text Transcription

Click to expand full text
NLAS6234 Audio DPDT Switch with Noise Suppression Description The NLAS6234 is a DPDT switch featuring Popless noise suppression circuitry designed to prevent pass through of undesirable transient signals known as pops. Intended for audio systems within portable applications, it provides protection against audible pops that are generated when switching between two different audio sources, such as an amplifier and a CODEC. The NLAS6234 incorporates two double throw switches controlled by a single select line which allows the system controller to simultaneously switch between two sets of signal lines. The Popless noise suppression circuitry controls the ON and OFF times that define the time interval when switching between the normally open (NO) and normally closed (NC) terminals.
Published: |