OR-3H4
OR-3H4 is Photo coupler manufactured by Orient.
Features
(1) Current transfer ratio(CTR) : MIN. 20% at IF = ±1m A, VCE = 5V, Ta=25 ℃ (2) High input-output isolation voltage.(VISO=3,750Vrms) (3) BVCEO = 80V(MIN) (4) Operating temperature:-55℃ to 125℃ (5) Safety approval
UL approved(No.E323844) VDE approved(No.40029733)
CQC approved (No.CQC19001231256) (6) In pliance with Ro HS, REACH standards (7) MSL Class Ⅰ
2. Instructions
The OR-3H4 series device contains two infrared led and a photo transistor detector.They are encapsulated in a 4-pin SOP, free of halogens and Sb2O3
3. Application Range
(1) Hybrid substrates that require high density mounting (2) Programmable controller (3) System apparatus,measuring instruments
4. Max Absolute rated Value (Normal Temperature=25℃)
Parameter
Symbol
Rated Value
Input
Forward Current
Peak forward current(t=10us)
Reverse Voltage
Power Dissipation
Junction Temperature
Output
Collector and emitter Voltage
Emitter and collector Voltage
Collector Current
Power Dissipation
Junction Temperature
Total Power Dissipation
- 1 Insulation Voltage
Operating Temperature
Storage Temperature
- 2 Soldering Temperature
IF IFM VR P Tj VCEO VECO IC PC Tj Ptot Viso Topr Tstg Tsol
50 1 6 65 125 80 7 50 150 125 200 3750 -55 to +125 -55 to +150 260
Copyright© 2020 Orient .All rights Reserved
Unit m A A V m W ℃ V m A m W ℃ m W Vrms ℃
V11
Shenzhen Orient ponents Co ., Ltd
- 1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave.
- 2.soldering time is 10 seconds.
5. Opto-electronic Characteristics(Normal Temperature=25℃)
Input Output
Parameter...
