AT-0104HD - INVERTER

Datasheet Details

Part number	AT-0104HD
Manufacturer	PIS
File Size	102.93 KB
Description	INVERTER
Datasheet	AT-0104HD Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
AT-0104-HT7	CCFL BACKLIGHT INVERTER	ETC
AT-0104LG	CCFL BACKLIGHT INVERTER	ETC
AT-09632J	LCD_Module	ETC
AT-103	5-Bit Digital Attenuator	Tyco Electronics
AT-106	Digital Attenuator	Tyco Electronics

Other Datasheets by PIS

Part Number	Description
AT-0150LG	CCFL BACKLIGHT INVERTER
AT-0151LS	CCFL BACKLIGHT INVERTER
AT-0170SS	CCFL BACKLIGHT INVERTER
AT-1104NC	CCFL BACKLIGHT INVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

SPECIFICATION 1-1.SCOPE (AT-0104HD) 1-2.INTRODUCTION 1-3.DIMENSIONS 1-4.INTERFACE(INPUT/OUTPUT) 1-5.ELECTRICAL CHARACTERISTICS 1-6.ENVIRONMENTAL CONDITIONS 1-7.LOT MARKING 1/4 Free Datasheet http://www.datasheet4u.com/ 1.SPECIFICATION 1-1)Scope This specification is for inverter of 10.4 ~ 14".1, 1CCFL LCD module . (Applicable panel : HD - HT12X11, SAMSUNG 10.4~14.1" UNIPAC 8.4~10.4", PVI 10.4" LCD MODULE etc.) 1-2)Introduction This inverter is a SMPS using DC input voltage (DC 10-13.2V) At DC input voltage 12V, AC output voltage is above AC 1.0KV RMS. Inverter can control output current,then controls brightness of CCFL in LCD module.(for 1 Lamp) 1-3)Dimensions (tolerance:±0.2mm) 95.5 4.0 4.5 2 CN2 20 CN1 5 1 INDUCTOR TRANS 1 2.7 9.5 56.6 TRANS PCB 1.2t MAX 8.