Datasheet4U Logo Datasheet4U.com

PT5139 - Dual H-Bridge Motor Driver

General Description

The PT5139 is a dual bridge motor driver which has two H-bridge drivers, and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads.

It operates from 2.7V to 15V, and can deliver load current up to 700mA per channel.

Key Features

  • include sinking and sourcing current limits implemented with external sensors, under-voltage lockout, over current protection (OCP) and thermal shutdown. An over-temperature output flag is available to indicate thermal shutdown. The PT5139 is packaged in 16-pin, 5.0mm×6.4mm TSSOP-EP and TSSOP, 3mm×3mm and 4mmx4mm QFN package with an exposed thermal pad on the back. BLOCK.

📥 Download Datasheet

Datasheet Details

Part number PT5139
Manufacturer PTC
File Size 1.68 MB
Description Dual H-Bridge Motor Driver
Datasheet download datasheet PT5139 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PT510 TO-18 Type Narrow Acceptance Phototransistor Sharp Electrionic Components
PT5107 200mA Low Dropout Regulator PowTech
PT5108 High-PSRR 500mA LDO Powtech
PT5108X High-PSRR 500mA LDO Powtech
PT5109 High-PSRR 300mA LDO Powtech

Other Datasheets by PTC

Part Number Description
PT5139A Dual H-Bridge Motor Driver
PT5104 1 CH Micro-actuator Driver
PT5111 6+1CH DV/DSC Motor Driver
PT5126A 1CH DC Motor Driver
PT5606 600V Half-bridge driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DESCRIPTION The PT5139 is a dual bridge motor driver which has two H-bridge drivers, and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads. It operates from 2.7V to 15V, and can deliver load current up to 700mA per channel. The output driver block of each H-bridge consists of N-channel power MOSFETS configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current. The internal safety features include sinking and sourcing current limits implemented with external sensors, under-voltage lockout, over current protection (OCP) and thermal shutdown. An over-temperature output flag is available to indicate thermal shutdown. The PT5139 is packaged in 16-pin, 5.0mm×6.