PTC PT6315-S
PT6315-S is a Vacuum Fluorescent Display (VFD) Controller driven on a 1/4 to 1/8 duty factor. It is housed in a 28pins, SOP. COMMAND 1: DISPLAY MODE SETTING COMMANDS PT6315-S provides 4 display mode settings as shown in the diagram below: As stated earlier a command is the first one byte (b0 to b7) transmitted to PT6315-S via the DIN Pin when STB is “LOW”.| Part No. | PT6315-S |
|---|---|
| Datasheet | PT6315-S Download |
| Manufacturer |  PTC |
| Description | VFD Driver/Controller |
| Buy | Stock & Price |
DESCRIPTION
Eight segment output lines, 4 grid output lines, 4 segment/grid output drive lines, one display memory, control circuit, key scan circuit are all incorporated into a single chip to build a highly reliable peripheral device for a single chip micro computer. Serial data is fed to PT6315-S via a three-line serial interface. It is housed in a 28pins, SOP.FEATURES
●●
●
●
●
●
●
● CMOS Technology Low Power Consumption Key Scanning (8 x 2 matrix) Multiple Display Modes: (8 Segments, 8 Digits to 12 Segments, 4 Digits) 8-Step Dimming Circuitry Serial Interface for Clock, Data Input, Data Output, Strobe Pins No External Resistors Needed for Driver Outputs Available in 28pins, SOP APPLICATION
● Microcomputer Peripheral Devices PT6315-S V1.9 -1- September, 2005 Tel: 886-2-66296288 Fax: 886-2-29174598 URL: VFD Driver/Controller IC PT6315-S BLOCK DIAGRAM SG1/KS1 Control DIN DOUT CLK STB Serial Data Interface Segment Driver/ Display Memory Grid Driver/ Key Scan Output OSC OSC R SG2/KS2 S...
