1SMB3EZ12 Datasheet | Pan Jit International Inc.

1SMB3EZ11 THRU 1SMB3EZ200 SURFACE MOUNT SILICON ZENER DIODE VOLTAGE - 11 TO 200 Volts Power - 3.0 Watts Features l For surface mounted applications in order to optimize board space l Low profile package l Built-in strain relief l l l l l l Glass passivated junction Low inductance Excellent clamping capability Typical ID less than 1 £g A above 11V High temperature soldering : 260 ¢J /10 seconds at terminals Plastic package has Underwriters Laboratory Flammability Classification 94V-O DO-214AA MODIFIED J-BEND MECHANICAL DATA Case: JEDEC DO-214AA, Molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes positive end (cathode) except Bidirectional Standard Packaging: 12mm tape(EIA-481) Weight: 0.003 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. SYMBOL Peak Pulse Power Dissipation (Note A) PD Derate above 75 ¢J Peak forward Surge Current 8.3ms single half sine-wave superimposed on rated IFSM load(JEDEC Method) (Note B) Operating Junction and Storage Temperature Range TJ,TSTG NOTES: 2 A. Mounted on 5.0mm (.013mm thick) land areas. B. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. VALUE 3 24 15 -55 to +150 UNITS Watts mW/¢J Amps ¢J 1SMB3EZ11 THRU 1SMB3EZ200 ELECTRICAL CHARACTERISTICS (T A=25 ¢J unless otherwise noted) VF=1.2 V max , IF=500 mA for all types Type No. (Note 1.) Nominal Test Zener Voltage current Maximum Zener Impedance Vz @ IZT IZT (Note 3.) volts mA Z ZT @ IZT ZZk @ IZK IZK (Note 2.) Ohms Ohms mA Leakage Current IR £g A Max @ VR Volts Maximum Surge Zener Current Current @ TA = 25 ¢J IZM ir - mA Madc (Note 4.) 225 246 208 193 180...