SA200 Datasheet | PanJit Semiconductor

FEATURES 1.0(25.4)MIN. GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 5.0 to 220 Volts POWER 500 Watts DO-15 Unit: inch(mm) - Plastic package has Underwriters Laboratory Flammability Classification 94V-O - Glass passivated chip junction in DO-15 package - 500W surge capability at 1ms - Excellent clamping capability - Low zener impedance - Fast response time: typically less than 1.0 ps from 0 volts to BV min .034(.86) .028(.71) .300(7.6) - Typical IR less than 1µA above 10V - High temperature soldering guaranteed: 260°C/10 seconds/.375" ,(9.5mm) lead length/5lbs., (2.3kg) tension - In pliance with EU Ro HS 2002/95/EC directives .230(5.8) .140(3.6) MECHANICAL DATA - Case: JEDEC DO-15 molded plastic - Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 - Polarity: Color band denoted cathode except Bipolar - Mounting Position: Any - Weight: 0.015 ounce, 0.4 gram DEVICES FOR BIPOLAR APPLICAIONS For Bidirectional use C or CA Suffix for types Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. SYMBOL PPPM I PPM PM (AV) VALUE 500 SEE TABLE 1 1.0 UNITS Watts Amps Watts RATING Peak Pulse Power Dissipation at TA=25°C, TP=1ms(Note 1, Fig.1) Peak Pulse Current of on 10/1000µs waveform (Note 1,Fig.3) Steady State Power Dissipation at TL=75°CLead Lengths .375",(9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load(JECED Method) (Note 3) Operating and Storage Temperature Range NOTES: 1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2. 2.Mounted on Copper Leaf area of 1.57in2(40mm2). 3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. 1.0(25.4)MIN. .104(2.6) IFSM TJ , TSTG 70 -65 to +175 Amps °C LEGAL STATEMENT Copyright Pan Jit International, Inc 2007 The information...