SR38 Datasheet | PanJit Semiconductor

Features l Plastic package has Underwriters Laboratory Flammability Classification 94V-O l For surface mounted applications l Low profile package l Built-in strain relief l Metal to silicon rectifier majority carrier conduction l Low power loss, High efficiency l High current capability, low VF l High surge capacity l For use in low voltage high frequency inverters, free wheeling, and polarity protection applications l High temperature soldering guaranteed: 260 ¢J /10 seconds at terminals SMB/DO-214AA MECHANICAL DATA Case: JEDEC DO-214AA molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode Standard packaging: 12mm tape (EIA-481) Weight: 0.003 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Resistive or inductive load. SYMBOLS SR32 SR33 SR34 SR35 SR36 SR38 SR39 UNITS 20 30 40 50 60 80 90 Volts 14 21 28 35 42 56 64 Volts 20 30 40 50 60 80 90 Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL (See Figure 1) Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method) Maximum Instantaneous Forward Voltage at 3.0A (Note 1) Maximum DC Reverse Current TA=25 ¢J (Note 1) At Rated DC Blocking Voltage TA=100 ¢J Maximum Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range NOTES: 1. Pulse Test with PW=300 £g sec, 2% Duty Cycle. VRRM VRMS VDC I(AV) IFSM VF IR R £K JL R £K JA TJ TSTG 3.0 80 0.50 0.70 0.5 20.0 17 55 -50 to +125 -50 to +150 0.85 Amps Amps Volts m A ¢J /W ¢J ¢J 2. Mounted on P.C.Board with 5.0mm (.013mm thick) copper pad areas. RATING AND CHARACTERISTIC CURVES SR32 THRU SR39 INSTANTANEOUS FORWARD CURRENT AMPERES SR32 10 SR36 AVERAGE FORWARD CURRENT, AMPERES 3.0 2.5 2.0 1.5 1.0 0.5 50 60 70 80 90 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR...