SS18 Datasheet | PanJit Semiconductor

FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O l For surface mounted applications l Low profile package l Built-in strain relief l Metal to silicon rectifier .. majority carrier conduction l Low power loss, High efficiency l High current capability, low VF l High surge capacity l For use in low voltage high frequency inverters, free wheeling, and polarity protection applications l High temperature soldering: 260 ¢J /10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-214AC molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color bank denotes cathode Standard packaging: 12mm tape (EIA-481) Weight: 0.002 ounce, 0.064 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Resistive or inductive load. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL (See Figure 1) Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A (Note 1) Maximum DC Reverse Current TA=25 ¢J (Note 1) At Rated DC Blocking Voltage TA=100 ¢J Maximum Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range SYMBOLS SS12 SS13 SS14 SS15 SS16 SS18 SS19 S100 UNITS 20 30 40 50 60 80 90 100 Volts VRRM 14 21 28 35 42 56 64 71 Volts VRMS 20 30 40 50 60 80 90 100 Volts VDC l SMA/DO-214AC I(AV) IFSM VF IR R £K JL R £K JA TJ TSTG 0.5 1.0 30.0 0.70 0.5 20.0 28 88 -50 to +125 -50 to +150 0.85 Amps Amps Volts m A ¢J /W ¢J ¢J NOTES: 1. Pulse Test with PW=300 £g sec, 2% Duty Cycle. 2. Mounted on P.C.Board with 5.0mm2 (.013mm thick) copper pad areas. RATING AND CHARACTERISTIC CURVES SS12 THRU S100 SS12~SS14 AVERAGE FORWARD CURRENT AMPERES INSTANTANEOUS FORWARD CURRENT AMPERES SS15~SS16 SINELE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD P.C.B...