UF108G Datasheet | PanJit Semiconductor

FEATURES l Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding pound l l l l Glass passivated junction in DO-41 package 1.0 ampere operation at TA=55 ¢J with no thermal runaway Exceeds environmental standards of MIL-S-19500/228 Ultra Fast switching for high efficiency DO-41 MECHANICAL DATA Case: Molded plastic, DO-41 Terminals: axial leads, solderable per MIL-STD-202, Method 208 Polarity: Band denotes cathode Mounting Position: Any Weight: 0.013 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. UF100G UF101G UF102G UF104G UF106G UF108G UNITS Peak Reverse Voltage, Repetitive; VRM: Maximum RMS Voltage DC Reverse Voltage; VR Average Forward Current, Io @ TA=55 ¢J 3/8” lead length, 60 Hz, resistive or inductive load Peak Forward Surge Current, IFM (surge) 8.3msec. single half sine wave superimposed on rated load(JECEC method) Maximum Forward Voltage VF @ 1.0A, 25 ¢J Maximum Reverse Current, @ Rated TJ =25 ¢J Reverse Voltage TJ =100 ¢J Typical Junction capacitance (Note 1) CJ Typical Junction Resistance (Note 2) R £K JA Reverse Recovery Time IF=.5A, IR=1A, Irr=.25A Operating and Storage Temperature Range NOTES: 50 35 50 100 70 100 200 140 200 1.0 30 400 280 400 600 420 600 800 560 800 V V V A A 1.30 10.0 150 17 60 V £g A £g A PF ¢J /W ns ¢J -55 to +150 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Thermal resistance from junction to ambient and from junction to lead length at 0.375"(9.5mm) P.C.B. mounted RATING AND CHARACTERISTIC CURVES UF100G THRU UF108G trr +0.5A 0 -0.25 NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22p F 2.Rise Time = 10ns max. Source Impedance = 50 Ohms -1.0 SET TIME BASE FOR 50 ns/cm 1cm Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 10 UF100G...