S510 Datasheet | PanJit Semiconductor

FEATURES - Plastic package has Underwriters Laboratory Flammability Classification 94V-O - For surface mounted applications - Low profile package - Built-in strain relief - Metal to silicon rectifier. majority carrier conduction - Low power loss,high efficiency - High surge capacity - For use in low voltage high frequency inverters, free wheeling, and polarity protection applications - High temperature soldering guaranteed: 260°C /10 seconds at terminals .128 (3.25) .108 (2.75) SMC / DO-214AB Unit: inch ( mm ) .280 (7.11) .260 (6.60) .012 (.305) .006 (.152) MECHANICAL DATA Case: JEDEC DO-214AB molded plastic Terminals:Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Standard packaging: 16mm tape (EIA-481) Weight: 0.007 ounce, 0.21 gram .050 (1.27) .030 (0.76) .320 (8.13) .305 (7.75) .103 (2.62) .079 (2.00) .008(.203) .002(.051) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load. SYMBOLS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T L (See figure 1) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 5.0A (Note 1) Maximum DC Reverse Current (Note 1) Ta= 25°C at Rated DC Blocking Voltage Maximum Thermal Resistance(Note 2) Ta=100°C IR RθJL RθJA TJ TSTG VRRM VRMS V DC I(AV) SK52 SK53 20.0 14.0 20.0 30.0 21.0 30.0 SK54 40.0 28.0 40.0 SK55 50.0 35.0 50.0 SK56 60.0 42.0 60.0 5.0 SK58 80.0 56.0 80.0 SK59 90.0 63.0 90.0 S510 100.0 70.0 100.0 .245 (6.22) .220 (5.59) UNITS I FSM VF 0.50 100.0 0.75 0.5 20.0 17.0 55.0 -50 to +125 -55 to +150 0.85 A V m A °C/W °C °C Operating and Storage Temperature Range T J Storage Temperature Range NOTES: A.Pulse Test with PW =300µsec, 2% Duty Cycle. B.Mounted on P.C. Board with 14mm 2 (.013mm thick)...