SL33 Datasheet | PanJit Semiconductor

FEATURES l Plastic package has Underwriters Laboratory l l l l l l l l l Flammability Classification 94V-O For surface mounted applications Low profile package Built-in strain relief Metal to silicon rectifier majority carrier conduction Low power loss, High efficiency High current capability, low VF High surge capacity For use in low voltage high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 260 ¢J /10 seconds at terminals SMC/DO-214AB MECHANICAL DATA Case: JEDEC DO-214AB molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode Standard packaging: 16mm tape (EIA-481) Weight: 0.007 ounce, 0.21 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Resistive or inductive load. SYMBOLS SL32 20 14 20 SL33 30 21 30 SL34 40 28 40 UNITS Volts Volts Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL (See Figure 1) Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method) Maximum Instantaneous Forward Voltage at 3.0A (Note 1) Maximum DC Reverse Current TA=25 ¢J (Note 1) At Rated DC Blocking Voltage TA=100 ¢J Maximum Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range NOTES: 1. Pulse Test with PW=300 £gs, 1% Duty Cycle. VRRM VRMS VDC I(AV) IFSM VF IR R £K JL R £K JA TJ TSTG 3.0 100.0 0.38 0.38 0.5 20.0 17 55 -50 to +125 -50 to +150 0.40 Amps Amps Volts m A ¢J /W ¢J ¢J 2. Mounted on P.C.Board with 14mm (.013mm thick) copper pad areas. RATING AND CHARACTERISTIC CURVES SL32 THRU SL34 INSTANTANEOUS FORWARD CURRENT AMPERES AVERAGE FORWARD CURRENT, AMPERES 3.0 2.5 2.0 1.5 SINGLE PHASE HALF MOUNTED ON WAVE 60Hz RESISTIVE TJ = 25 ¢J PULSE WIDTH = 300us 1% DUTY CYCLE 1.0 INDUCTIVE LOAD P.C.B 0.5 0.55×0.55"(14×1...