TSP140SA Datasheet | PanJit Semiconductor

FEATURES - Protects by limiting voltages and shunting surge currents away from sensitive circuits - Designed for telemunications applications such as line cards, modems, PBX, FAX, LAN,VHDSL - Helps meet standards such as GR1089, ITU K.20, IEC950, UL1459&50, FCC part 68 - Low capacitance, High surge (A, B, C rating available), precise voltage limiting, Long life THYRISTOR SMB/DO-214AA SUMMARY ELECTRICAL CHARACTERISTICS TSP058SA - TSP320SA 8. Independently evaluate and test the suitability and performance of the device in the application MAXIMUM SURGE RATINGS (TJ = 25 °C UNLESS OTHERWISE NOTED) Rating Symbol Short-Circuit Current Wave Open-Circuit Voltage Wave Value Notes 2/10 µs 2/10 µs 175 A 8/20 µs 1.2/50 µs 150 A 10/160 µs 10/160 µs 100 A Non-Repetitive Peak Pulse Current I PPS 5/310 µs 10/700 µs 85 A 10/560 µs 10/560 µs 70 A 10/1000 µs 10/1000 µs 50 A (1,2,3,4) Non-Repetitive Peak On-State Surge Current I TSM 20A (1,2,4,5,6) Notes: 1. Thermal accumulation between successive surge tests is not allowed. 2. The device under test initially must be in thermal equilibrium with TJ = 25 °C. 3. Test at 1 cycle, 60 Hz. 4. Surge ratings are non-repetitive because instantaneous junction temperatures may exceed the maximum rated TJ. Nevertheless, devices will survive many surge applications without degradation. Surge capability will not degrade over a device's typical operating life. 5. Adjust the surge generator for optimum current-wave accuracy when both voltage and current wave specifications cannot be exactly met. The current wave is more...