JTV1AS-PA-12V Datasheet | Panasonic

FEATURES - Surge withstand voltage: 6,000 V - High switching capacity - 30 A for 1 Form A - 2 contact arrangements - 1 Form A or 1 Form C - “TMP” types available - UL/C-UL recognized - Class F types standard 20.2±0.6 .795±.024 27.9±0.6 1.096±.024 PCB type .. TMP type Ro HS Directive patibility information http://.nais-e./ SPECIFICATIONS Contacts Arrangement Initial contact resistance, max. (By voltage drop method, 6 V DC 1 A) Contact material Max. switching power Max. switching voltage Max. switching Rating current Min. switching capacity#1 (Reference value) Mechanical Expected Electrical life (Resistive load) PCB & TMP type 1 Form A 1 Form C 50 mΩ Ag Sn O2 type N.C.: 2770 VA 8310 VA N.O.: 5540 VA 277 V AC 30 A N.C.: 10 A N.O.: 20 A 100 m A, 5 V DC Min. 1×107 N.O.: 20 A 277 V AC Min. 1×105- N.C.: 10 A 277 V AC Min. 1×105- Conditions for operation, transport and storage- 8 (Not freezing and condensing at low temperature) Unit weight PCB & TMP type Approx. 1,000 m W Characteristics Initial insulation resistance- 1 Between contacts Initial breakdown Between contacts voltage- 2 and coil Initial surge voltage between contact and coil Operate time- 4 (at nominal voltage) Release time (without diode)- 4 (at nominal voltage) Functional- 5 Shock resistance Destructive- 6 Vibration resistance Functional- 7 Destructive Ambient temp. PCB & TMP type Min. 100 MΩ at 500 V DC 1,200 Vrms 3,500 Vrms 6,000 V- 3 Max. 15 ms Max. 10 ms 98 m/s2 {10 G} 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 1.5 mm 10 to 55 Hz at double amplitude of 2 mm - 55°C to +85°C - 67°F to +185°F 5 to 85% R.H. PCB type: Approx. 25 g (.88 oz) TMP type: Approx. 30 g (1.06 oz) 20 A 277 V AC Min. 1×105- Humidity - The life is for open venting-hole condition. Coil at 20°C 68°F Nominal operating power #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is remended to check this with the actual load. Remarks - Specifications will vary with...