Datasheet Details
| Part number | AN5769 |
|---|---|
| Manufacturer | Panasonic |
| File Size | 53.86 KB |
| Description | H/V convergence correction-IC |
| Datasheet |
 AN5769 Datasheet
|
|
|
| Part number | AN5769 |
|---|---|
| Manufacturer | Panasonic |
| File Size | 53.86 KB |
| Description | H/V convergence correction-IC |
| Datasheet |
AN5769 Datasheet
|
|
|
|
s Pin No.
1 2 3 4 5 6 7 8 9 Description Supply voltage 12 V (VCC1) Output block supply voltage 7 V (VCC2), Protective resistor is needed.
N.C.
ICs for TV AN5768 TILT correction IC s Overview The AN5768 is a rotation correction (TILT) IC for CRT monitor incorporating a driving transistor.
It enables ±250 mA (max.) DC current flow by connecting a coil between the output pins which operate with a reverse phase each other.
19.9±0.1 18.3±0.25 φ2.65±0.1 8.4±0.25 6.3±0.3 7.1±0.25 5.8±0.25 1.5±0.25 9 8 7 6 5 4 3 2 1 5.6±0.25 3.75±0.25 Unit: mm φ3.3±0.1 0.5±0.1 1.2±0.25 15.0 1.7±0.25 s Applications 1.7 ±0.25 • CRT monitors HSIP009-P-0000 s Block Diagram 2 V CC2 + 4 In − 7 8 VCC1 1 12 V Bias 5 GND2 9 3 GND1 6 +0.1 0.45 –0.05 • DC control input: 0 V to 5 V • Output dynamic range: 1.2 V to 3.8 V • Maximum output current: ±250 mA 0.1±0.05 2.
| Part Number | Description |
|---|---|
| AN5763 | VERTICAL DEFLECTION SIGNAL PROCESSOR |
| AN5764 | Horizontal picture position controller |
| AN5764N | Horizontal picture position controller |
| AN5765 | CRT heater voltage controller |
| AN5767 | Synchronizing signal processor |
| AN5767K | Synchronizing signal processor |
| AN5768 | TILT correction-IC |
| AN5707NS | RV ELECTRONIC TUNER-CONTROLLOR |
| AN5710 | B/W TV VIEDO IF Amplifer |
| AN5733 | Dual Attenuator |