Datasheet4U Logo Datasheet4U.com

AN5790N - Horizontal Signal Processor

General Description

Pin No.

1 2 Description Power supply 12 V (VCC1) Output block power supply 7 V (VCC2), protection resistor is required.

3 Output block power supply 7 V (VCC3), protection resistor is required.

Key Features

  • 12 11 10 9 8 7 6 5 4 3 2 1 φ3.3 0.5±0.1 1.2±0.25 28.0±0.3 1.7±0.25 HSIP012-P-0000 s Block Diagram 3 + 4 In-1.
  • 7 8 6 5 2 VCC1 = 12 V 1 Bias GND1 12 + In-2.
  • 10 11 9 GND2 GND3 29.4±0.3 1 AN5769 s Pin.

📥 Download Datasheet

Datasheet Details

Part number AN5790N
Manufacturer Panasonic
File Size 166.78 KB
Description Horizontal Signal Processor
Datasheet download datasheet AN5790N Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN5715 Low-Voltage VIF/SIF Panasonic
AN5720 B/W TV Video Detector AMplifier Matsushita
AN5722 B/W TV Video Detector AMplifier Matsushita
AN5730 B/W TV Sound IF Amplifier Panasonic
AN575 IEEE 754 Compliant Floating-Point Routines Microchip Technology

Other Datasheets by Panasonic

Part Number Description
AN5791 PHASE SHIFT
AN5792 Horizontal Signal Processor
AN5795NK Deflection Signal Processor
AN5707NS RV ELECTRONIC TUNER-CONTROLLOR
AN5710 B/W TV VIEDO IF Amplifer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICs for TV AN5769 H/V convergence correction IC s Overview The AN5769 is an IC to correct convergence in horizontal and vertical directions. It is possible to allow ±100 mA (max.) DC current flow by connecting a coil between the output pins which operate with the reverse phase each other. 5.8±0.25 7.9±0.3 3.5±0.25 1.2±0.25 Unit: mm 0.45 –0.05 s Applications • CRT monitors 1.7±0.25 +0.1 • DC control input 0 V to 5 V • Output dynamic range 1.2 V to 3.8 V • Maximum output current ±100 mA 2.54 s Features 12 11 10 9 8 7 6 5 4 3 2 1 φ3.3 0.5±0.1 1.2±0.25 28.0±0.3 1.7±0.25 HSIP012-P-0000 s Block Diagram 3 + 4 In-1 − 7 8 6 5 2 VCC1 = 12 V 1 Bias GND1 12 + In-2 − 10 11 9 GND2 GND3 29.4±0.3 1 AN5769 s Pin Descriptions Pin No.