Datasheet Details
| Part number | AN7535NSA |
|---|---|
| Manufacturer | Panasonic |
| File Size | 80.20 KB |
| Description | Headphone amplifier |
| Datasheet | AN7535NSA_PanasonicSemiconductor.pdf |
|
|
Overview: ICs for Audio mon Use AN7535NSA Headphone amplifier IC for portable equipment 7.8±0.3 Unit : mm 13 s Overview The AN7535NSA is an audio signal processing IC in which line amplifiers and beep circuit are built in the headphone amplifiers for use in portable equipment. Its headphone output block is using the center amplifier method which eliminates the need for coupling capacitor so that the circuit is most suitable for rationalization of audio circuit. 24 6.1±0.3 8.1±0.3 1 12 0.525±0.1 1.2±0.2 (0.5) (0.325) 0.65 0.22−0.05 Seating plane +0.1 • Output coupling capacitor is not required (Center amplifier method) • Built-in line amplifiers • Built-in headphone amplifier gain change-over circuit (8 dB/12 dB) • Built-in mute circuit • Built-in beep circuit • Built-in circuit against a shock noise generated when power supply is momentary cut off. 0.525±0.
| Part number | AN7535NSA |
|---|---|
| Manufacturer | Panasonic |
| File Size | 80.20 KB |
| Description | Headphone amplifier |
| Datasheet | AN7535NSA_PanasonicSemiconductor.pdf |
|
|
|
s Pin No.
1 2 3 4 5 6 7 8 9 10 11 12 VCC1 Ripple filter Supply voltage Headphone amplifier ch.1 output pin N.C.
Center amplifier output pin Output GND Headphone amplifier ch.2 output pin Line amplifier ch.1 output pin Line amplifier supply voltage Line amplifier ch.2 output pin N.C.
| Part Number | Description |
|---|---|
| AN7500FHQ | aUDIO SIGNAL PROCESSING ic FOR 1.5 v HEADPHONE STEREO |
| AN7510 | BTL Audio Power IC |
| AN7510S | BTL Audio Power IC |
| AN7511 | BTL Audio Power IC |
| AN7511S | 1-W BTL audio power amplifier |
| AN7512 | BTL Audio-Power |
| AN7512S | BTL Audio Power IC |
| AN7513 | BTL Audio Power IC |
| AN7513S | BTL Audio Power IC |
| AN7515SH | Audio signal processor |