Datasheet4U Logo Datasheet4U.com

AN7560Z - BTL output power

General Description

Pin No.

) VCC ch.3 Output (+) GND(Output ch.3) ch.3 Output ( ) GND (Output ch.2) ch.2 Output (+) Auxiliary sound input ch.2 Output (

) VCC ch.1 Output (+) Pin No.

Key Features

  • A pattern layout in which input and output pattern do not intersect each other on single-sided printed circuit board is possible.
  • Incorporating various protection circuits (temperature, shortcircuit to VCC, VCC-open short circuit to VCC, shortcircuit to GND, GND-open short circuit to GND, overvoltage, power supply surge, and ASO, etc. ).
  • Built-in standby function (shock noise-free when STBon/off).
  • Built-in muting function (shock noise-free when Muteon/off).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN75 High Power Factor LED Replacement T8 Fluorescent Tube using the AL9910 High Voltage LED Controller Diodes
AN7504SB Pre-amp. and power amp. IC Panasonic
AN7512SH Dual 1-W BTL audio power amplifier Panasonic
AN7516SH Audio signal processing IC Panasonic
AN7522N Silicon Monolithic Bipolar IC Panasonic

Other Datasheets by Panasonic

Part Number Description
AN7561Z BTL output power
AN7500FHQ aUDIO SIGNAL PROCESSING ic FOR 1.5 v HEADPHONE STEREO
AN7510 BTL Audio Power IC
AN7510S BTL Audio Power IC
AN7511 BTL Audio Power IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICs for Audio Common Use AN7560Z BTL output power IC for car audio s Overview The AN7560Z is an audio power IC developed as the sound output of car audio (35 W by 4-ch.). A capacitor and resisitor to stop oscillation are built in between the output pin and GND so that a space saving of set is possible. Also, it incorporates a perfect muting circuit without shock noise so that a shock noise design under the set transient condition can be made easily when used together with its standby function. In addition, it incorporates various protection circuits to protect the IC from destruction by GND-open-shortcircuit to ground and power supply surge which are the important subject of power IC protection. This IC will largely contribute to a high reliability design of the equipment. 31.0±0.3 27.