Datasheet4U Logo Datasheet4U.com

AN8813NSB - 4-channel driver

General Description

Pin No.

1 Description Base control pin for an external transistor of 3.3 V regulator 2 3 4 5 6 7 8 9 10 11 12 13 14 3.3 V regulator output monitor pin N.C.

Key Features

  • For the loading motor channel, there are 4 modes, that is, forward rotation, reverse rotation, brake and standby modes, and you can select a mode among them. The gain of it is fixed to 6 dB (±0.5 dB) with a small dispersion among the products.
  • 3.3 V supply voltage is available due to an external PNP-tr.
  • Driver I/O gain setting is possible with an additional external resistor.
  • Since the output and input lines are separated and respectively collected together.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN883 LOW-COST I2C LEVEL TRANSLATOR Silicon Laboratories
AN884 Driving Capacitive Loads Microchip
AN8850 MOTOR CONTROL CIRCUITS Unisonic Technologies
AN8 MAGNETIC SENSOR Cherry
AN80196CA ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 Intel Corporation

Other Datasheets by Panasonic

Part Number Description
AN8812SC 4 CH LINEAR DRIVER IC
AN8812SCR 4 CH LINEAR DRIVER IC
AN8814SB 4-channel driver
AN8816SB 4ch. Linear Driver
AN8819NFB 4Ch. Linear Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICs for Compact Disc/CD-ROM Player AN8813NSB 4-channel driver IC for optical disk drive s Overview The AN8813NSB is a 4-channel driver IC of the BTL method. Ch.1 is used only for the loading motor with little gain dispersion. 18.4±0.2 (5.15) (4.8) 28 22 21 15 (1.315) Unit: mm s Features • For the loading motor channel, there are 4 modes, that is, forward rotation, reverse rotation, brake and standby modes, and you can select a mode among them. The gain of it is fixed to 6 dB (±0.5 dB) with a small dispersion among the products. • 3.3 V supply voltage is available due to an external PNP-tr. • Driver I/O gain setting is possible with an additional external resistor • Since the output and input lines are separated and respectively collected together, pattern designing is relatively easy.