Datasheet4U Logo Datasheet4U.com

AN96A07K - Dynamic Focus Controller

General Description

Pin No.

1 2 3 4 5 6 7 8 9 GND Reference bias output (6V) Hor.

sampling pulse input Hor.

Key Features

  • q fH q q =15 to 90kHz, fV = 50 to 120Hz Constant-amplitude parabola-wave output following input frequency Coefficient of parabola-wave is controlled by an external resistor 8.4±0.3 4.80±0.25 1.05±0.25 3.05±0.25 3 to 15˚ 10.16±0.25 0.45.
  • 0.05 + 0.1 28-Pin SDIP Package (SDI 028-P-0400) s Block Diagram To Pin28 100pF + 18 25 15 VCC2 5 1µF 1µF + + 28 2 REF DC SAW.
  • TOOTH LIN.
  • LOG Conv. +.
  • 1µF 27 17 0.1µF 26 19 0.27µF 20 21 10kΩ 10kΩ 23 24 220kΩ 22 V.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICs for TV AN96A07K Dynamic Focus Controller IC for CRT Monitor s Overview The AN96A07K is a dynamic astigmatizm and focus (DAF)IC for CRT monitor. It outputs parabola waves for focus control. 26.7±0.3 Unit : mm s Features q fH q q =15 to 90kHz, fV = 50 to 120Hz Constant-amplitude parabola-wave output following input frequency Coefficient of parabola-wave is controlled by an external resistor 8.4±0.3 4.80±0.25 1.05±0.25 3.05±0.25 3 to 15˚ 10.16±0.25 0.45– 0.05 + 0.1 28-Pin SDIP Package (SDI 028-P-0400) s Block Diagram To Pin28 100pF + 18 25 15 VCC2 5 1µF 1µF + + 28 2 REF DC SAW – TOOTH LIN – LOG Conv. + – 1µF 27 17 0.1µF 26 19 0.27µF 20 21 10kΩ 10kΩ 23 24 220kΩ 22 VCC1 HOLD SAW – TOOTH ABS. LIN – LOG Conv. – + LIN – LOG Conv. 16 HOLD ABS. LIN – LOG Conv.