Datasheet4U Logo Datasheet4U.com

MN61113 Datasheet 2k-bit Eeproms

Manufacturer: Panasonic

Overview: EEPROMs MN61113, MN61113S 2K-Bit EEPROMs Overview The MN61113 and MN61113S are 2048-bit, bit sequential EEPROMs with built-in address counters. They sequentially increment the address with the clock input to produce serial output. They include built-in charge pump circuit and timer for automatically erasing, writing, and modifying data using only a single 3 volt power supply. To reduce write times, they include a block write function for writing up to 32 bits at a time. This function makes it possible to rewrite the contents of all 2048 bits within 1 second (typ.).

General Description

s Pin No.

1 2 3 4 5 6 7 8 Symbol DATA CE VCC GND PGM CLK RST OE Pin Name Data I/O Chip enable Power supply voltage Ground Program Clock input Reset input Output enable MN61113, MN61113S Electrical Characteristics VCC=2.6 to 3.5V, Ta=–10˚C to +60˚C 3 Volt Operation Parameter Power supply voltage "L" level input leakage current "H" level input leakage current Output leakage current "L" level input volta

Key Features

  • 2048 words × 1 bit organization Built-in reset function Tristate output Low power consumption.
  • 3 volt read: 1.5 mW (max. ).
  • 3 volt program: 6 mW (max. ).
  • 3 volt standby: 60 µW (max. ) Single 3 volt power supply (charge pump circuit built in) Self timer for use in automatically erasing and writing data Built-in data polling function Write cycles: 105 times Data storage interval: 10 years Pull-up resistor on CE pin. Pull-down resistors on PGM, CLK, and RST pins (TOP VIEW).

More Datasheets from Panasonic

Part Number Description
MN6152U PLL LSI with Built-In Prescaler
MN6153UC PLL LSI with Built-In Prescaler
MN6155 PLL LSI with Built-In Prescaler
MN63112S 2K-Bit EEPROM
MN6311S 2K-Bit EEPROM
MN63121 1K-Bit EEPROM
MN63151 EEPROM
MN63154 EEPROM
MN63Y1208 LSI
MN63Y1210 LSI

MN61113 Distributor