Datasheet4U Logo Datasheet4U.com

MN6311S Datasheet 2k-bit Eeprom

Manufacturer: Panasonic

Overview: EEPROMs MN6311S 2K-Bit EEPROM Overview The MN6311S is a 2048-bit, bit sequential EEPROM with a built-in address counter. It sequentially increments the address with the clock input to produce serial output. It includes a built-in charge pump circuit and timer for automatically erasing, writing, and modifying data using only a single 3 volt power supply. To reduce write times, it includes a block write function for writing up to 32 bits at a time. This function makes it possible to rewrite the contents of all 2048 bits within 1 second (typ.).

General Description

s Pin No.

1 2 3 4 5 6 7 8 Symbol DATA CE VCC GND PGM CLK RST OE Pin Name Data I/O Chip enable Power supply voltage Ground Program Clock input Reset input Output enable MN6311S Electrical Characteristics VCC=2.6 to 3.5V, Ta=–10˚C to +60˚C 3 Volt Operation Parameter Power supply voltage "L" level input leakage current "H" level input leakage current Output leakage current "L" level input voltage "H" level input voltage VCC power supply current (during operation) VCC power supply current (during standby)

Key Features

  • 2048 words × 1 bit organization Built-in reset function Tristate output Low power consumption.
  • 3 volt read: 1.5 mW (max. ).
  • 3 volt program: 6 mW (max. ).
  • 3 volt standby: 60 µW (max. ) Single 3 volt power supply (charge pump circuit built-in) Self timer for use in automatically erasing and writing data Built-in data polling function Write cycles: 105 times Data storage interval: 10 years (TOP VIEW) SOP008-P-0225.

More Datasheets from Panasonic

Part Number Description
MN63112S 2K-Bit EEPROM
MN63121 1K-Bit EEPROM
MN63151 EEPROM
MN63154 EEPROM
MN63Y1208 LSI
MN63Y1210 LSI
MN63Y1213 LSI
MN61113 2K-Bit EEPROMs
MN6152U PLL LSI with Built-In Prescaler
MN6153UC PLL LSI with Built-In Prescaler

MN6311S Distributor