ZU-1870MA8R Datasheet | Panasonic

Description Initial Release Page All Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Panasonic / Matsushita Industrial Information Equipment Co., Ltd. In case there is any contradiction appeared based on technical standard change/update etc., our specifications shall take precedence over such change/update. © 2004 Matsushita Industrial Information Equipment Co., Ltd. MIS-DG60B121 i MAGNETIC CARD READER SPECIFICATION PRECAUTIONS READ THIS SECTION CAREFULLY BEFORE INSTALLING OR USEING THIS READER MODULE. - Usage Avoid Extreme Heat and Cold Do not store or use the reader module in locations exposed to heat, direct sunlight, or extreme cold. Avoid moving the device with which it was incorporated between locations with large temperature differences. If the moisture condensation should occur, do not use the device. Operation: -10 °C to +50 °C Storage: -20 °C to +60 °C Avoid Humidity, Liquids and Dust Do not store or use the reader module in locations exposed to high humidity, liquids (include rain) or dust. If used in dusty conditions, the magnetic head life will be shortened. Avoid Corrosive Gases Keep the reader module away from oil or corrosive gases (salt, brimstone, chlorine, acid, alkali, etc.). Avoid Radio Frequency Interference Do not use the reader module near a television or radio receiver. Avoid Magnetic Fields Keep the reader module away from magnets and magnetic field sources, such as high voltage, strong electrical current, magnetic security devices or industrial equipment (speakers, microwave ovens and CRT display, etc.). Avoid Locations Near Electrical Appliances or Other Devices that Emit Electrical Noise Keep the reader module away from electrical noise sources, such as electric motors, printer, or puter equipment. Keep Clean the Magnetic Head Dirt, metal dust...