Datasheet4U Logo Datasheet4U.com

AN30180AA - 1.2 A Synchronous DC-DC Step Down Regulator

Key Features

  • Wide output voltage range : 1.20 V to 3.30 V.
  • Input voltage range : 2.5 V to 5.5 V.
  • Maximum Output Current : 1.2 A.
  • Load transient response is fast.
  • Output current limit control of 1.8 A to prevent Excessive current flows.
  • High efficiency over a wide load current area by DCM (discontinuous conductive mode) operation at light loads, CCM (continuous conductive mode) operation in heavy loads those two modes can be automatically switched.
  • Switching frequency of 2.

📥 Download Datasheet

Datasheet Details

Part number AN30180AA
Manufacturer Panasonic
File Size 625.56 KB
Description 1.2 A Synchronous DC-DC Step Down Regulator
Datasheet download datasheet AN30180AA Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN301 High-Speed DMOS FET Analog Switches and Switch Arrays TEMIC
AN302 THYRISTORS AND TRIACS / AN IMPORTANT PARAMETER ST Microelectronics
AN302 Exploit Digital Advantages in an SSB Receiver Analog Devices
AN303 HC-MOS Power Dissipation Fairchild Semiconductor
AN303 LATCHING CURRENT ST Microelectronics

Other Datasheets by Panasonic

Part Number Description
AN30180A 1.2A Synchronous DC-DC Step Down Regulator
AN30181A General-purpose High Efficiency Power LSI
AN30182A 600mA Synchronous DC-DC Step-Down Regulator
AN30183A 600mA Synchronous DC-DC Step Down Regulator / 300mA LDO Regulator Multi Power Supply
AN30185A General-purpose High Efficiency Power LSI

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DReovcisNioon. . T4A4-EA-06146 Product Standards AN30180AA http://www.semicon.panasonic.co.jp/en/ 1.2 A Synchronous DC-DC Step Down Regulator (VIN = 2.5 V to 5.5 V, VOUT = 1.20 V to 3.30 V) FEATURES  Wide output voltage range : 1.20 V to 3.30 V  Input voltage range : 2.5 V to 5.5 V  Maximum Output Current : 1.2 A  Load transient response is fast  Output current limit control of 1.8 A to prevent Excessive current flows  High efficiency over a wide load current area by DCM (discontinuous conductive mode) operation at light loads, CCM (continuous conductive mode) operation in heavy loads those two modes can be automatically switched  Switching frequency of 2.6 MHz during CCM.  100 % duty operation when input voltage goes down to output voltage.