EEVFK1E222M Datasheet | Panasonic

Features Endurance: 2000 to 5000h at105°C Low impedance (40 to 60% less than FCseries) Japan Miniaturization(30 to 50% less than FC series) Vibration-proof Ro HS directive pcroomdpulciat nist(a Pvaaritlsab Nleo:u Ep Eo Vn∗rφe1q2u.e5st=<.,(Eφ8EE<=∗)) n Specifications Category temp. range Rated W.V. Range -55 to +105°C 6.3 to 100V .DC Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature Endurance Shelf Life Resistance to Soldering Heat 3.3 to 6800 µ F ±20 % (120Hz/+20°C) I <= 0.01CV or 3(µA) After 2 minutes application of rated working voltage at +20°C. (Whichever is greater) Please see the attached standard products list W.V. (V) 6.3 10 16 25 35 50 63 80 100 Z(-25°C) / Z(+20°C) 2 2 2 2 2 2 2 2 2 (Impedance ratio Z(-40 °C)/ Z(+20 °C) 3 3 3 3 3 3 3 3 3 at 120 Hz) Z(-55°C)/ Z(+20 °C) 4 4 4 3 3 3 3 3 3 After the life with ìGî india.8 to 10 DC rated working are 5000hours)the vcoaltpaagceitoarts+s1h0a5l±l m2°e Cetfotrhe20li0m0ithsosupresc(if=>ieddiab.1e2lo.5w.and suffix post-test requirement at +20°C. Capacitance change ±30% of initial measured value (Suffix “G” is 35%) tan δ <= 200 % of initial specified value (Suffix “G” is 300%) DC leakage current <= initial specified value After storage for 1000hours at +105±2 °C with no voltage applied and then being stabilized at +20°C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering ( Refer to page 184 for remendable temperature profile.) and then being stabilized at +20°C, capacitor shall meet the following limits. Capacitance change ±10% of initial measured value tan δ <= initial specified value DC leakage current <=initial specified value n Marking Example.16V10µF Marking color : BLACK W.V. code n Dimensions in mm (not to scale) 0.3 max A ± 0.2 ( ) reference size (P) (I) B± 0.2 φD±0.5 Negative polarity...