PE15A63003 - Low Noise Amplifier

Pasternack

Key Features

30 MHz to 1500 MHz Frequency Range.
1 Watt input protection.
P1dB: 23 dBm.
High Small Signal Gain: 29 dB typical.
Gain Flatness: ±0.5 dB.
Gain Variance: ±1 dB.
Noise Figure: 1.6 dB typ.
50 Ohm Input and Output Matched.
-.

PE15A63003 low noise amplifier by Pasternack - Datasheet Preview

Datasheet Details

Part number	PE15A63003
Manufacturer	Pasternack
File Size	495.03 KB
Description	Low Noise Amplifier
Datasheet	PE15A63003 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
PE1500D-10F	CERMAX FOCUSED XENON ARC LAMPS	PerkinElmer Optoelectronics
PE1500D-10UV	CERMAX FOCUSED XENON ARC LAMPS	PerkinElmer Optoelectronics
PE1505	N-Channel Enhancement Mode Power MOSFET	semi one
PE1508N	DIODE MODULE	Nihon Inter Electronics
PE150A-10F	CERMAX FOCUSED XENON ARC LAMPS	PerkinElmer Optoelectronics

Other Datasheets by Pasternack

Part Number	Description
PE15A6002	RF Amplifier Module
PE15A1004	Low Noise Amplifier
PE1516	50 Ohm SMA Amplifier
PE12D1004	Waveguide Mixer Down Converter
PE1V12006	Voltage Control Oscillators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

39 dBm IP3, 1.6 dB NF, 23 dBm P1dB, 30 MHz to 1.5 GHz, Low Noise Amplifier, 29 dB Gain, SMA TECHNICAL DATA SHEET PE15A63003 The PE15A63003 is a Input Protected Low Noise RF coaxial amplifier operating in the 30 MHz to 1.5 GHz frequency range. The amplifier offers 1 Watt input protection, 1.6 dB typical noise figure, 23 dBm typical P1dB and high 29 dB small signal gain with gain flatness of ±0.5 dB typical. The low noise amplifier requires typically a 12V DC power supply. The connectorized SMA module is unconditionally stable and includes built-in voltage regulation. This low noise amplifier requires only a single positive supply, is unconditionally stable and operates over the temperature range of -55°C and 125°C.