Datasheet4U Logo Datasheet4U.com

PE9354 - SPDT High Power UltraCMOS RF Switch

Description

The PE9354 SPDT High Power UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC to 3000 MHz.

This single-supply reflective switch integrates onboard CMOS control logic driven by a simple, single-pin CMOS and TTL compatible control input.

Features

  • Single 3-volt power supply.
  • Low insertion loss: 0.55 dB at 2000 MHz.
  • High isolation of 30 dB at 2000 MHz.
  • Typical input 1 dB compression point of +31 dBm.
  • 100 Krad total dose.
  • Single-pin CMOS or TTL logic control.
  • Low cost Figure 2. Package Type 8-lead CSOIC RF1 RF2 CMOS Control Driver CTRL Table 1. A/C Electrical Specifications -55 °C to +125 °C, VDD = 3.0 V (ZS = ZL = 50 Ω) Parameter Operation Frequency Insertion Loss Isola.

📥 Download Datasheet

Datasheet Details

Part number PE9354
Manufacturer Peregrine Semiconductor
File Size 212.04 KB
Description SPDT High Power UltraCMOS RF Switch
Datasheet download datasheet PE9354 Datasheet

📁 Similar Datasheet

  • PE9354 - SPDT High Power RF Switch (TELEDYNE)
  • PE9304 - Low Power Divide-by-2 Prescaler (Teledyne)
  • PE9313 - high-performance static UltraCMOS prescaler (TELEDYNE)
  • PE90F120 - THYRISTOR MODULE (ETC)
  • PE90F120 - THYRISTOR MODULE (SanRex Corporation)
  • PE90F160 - THYRISTOR MODULE (ETC)
  • PE90F160 - Thyristor (SanRex Corporation)
  • PE90F40 - THYRISTOR MODULE (ETC)
  • PE90F40 - THYRISTOR MODULE (SanRex Corporation)
  • PE90F80 - THYRISTOR MODULE (ETC)
Other Datasheets by Peregrine Semiconductor
  • PE9301 - 3500 MHz Low Power UltraCMOS Divide-by-2 Prescaler Rad-hard for Space Applications
  • PE9303 - 3.5 GHz Low Power CMOS Divide-by-8 Prescaler For RAD-Hard Applications
  • PE9304 - Low Power Divide-by-2 Prescaler
  • PE9308 - 10.0 GHz Low Power UltraCMOS
  • PE9309 - 3.0 - 13.5 GHz Low Power UltraCMOS Divide-by-4 Prescaler
  • PE9311 - high-performance static UltraCMOS prescaler
  • PE9312 - Divide-by-4 Prescaler Radiation Tolerant
  • PE9313 - 1500 MHz Low Power UltraCMOS Divide-by-8 Prescaler RAD hard

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Product Specification PE9354 Product Description The PE9354 SPDT High Power UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC to 3000 MHz. This single-supply reflective switch integrates onboard CMOS control logic driven by a simple, single-pin CMOS and TTL compatible control input. Using a nominal +3-volt power supply, a typical input 1 dB compression point of +31 dBm can be achieved. The PE9354 also exhibits input-output isolation of better than 30 dB at 2000 MHz and is offered in a small 8-lead ceramic SOIC package. The PE9354 is optimized for commercial space applications. Single Event Latch up (SEL) is physically impossible and Single Event Upset (SEU) is better than 10-9 errors per bit/day.
Published: |