Datasheet4U Logo Datasheet4U.com

PI3V713 - 7-Channel Analog Video Switch

General Description

Pericom’s PI3V713 is a 7-channel video mux/demux used to switch between multiple VGA sources or end points.

In a notebook application where analog video signals are found in both the notebook and the dock, a switch solution is required to switch between the two video port locations.

Key Features

  • Designed specifically to switch VGA signals.
  • 7-Channels for VGA signals (R,G,B, Hsync, Vsync, DDC Data, and DDC CLK).
  • Automatic or manual switching supported.
  • Forces re-read of EDID when automatically switching.
  • VDD = 3.3V +/-10%.
  • DDC path will operate as a 5V to 3.3V level shifter.
  • H/V output buffer with +/-24mA drive.
  • ESD tolerance on video I/O pins is up to 12kV HBM per JEDEC standard.
  • -3dB BW of 1.7GHz.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PI3VDP1413A DisplayPort 3.4Gb/s Level Shifter/Redriver Pericom Semiconductor
PI3VDP1430 Dual Mode DisplayPort to HDMI Level shifter/Re-driver Pericom Semiconductor
PI3VDP1431 DisplayPort 3.4Gb/s Level Shifter/Redriver Pericom Semiconductor
PI3VDP3212 2-Lane DisplayPort Rev 1.2 Compliant Switch Pericom Semiconductor
PI3VDP411LS Digital Video Level Shifter from AC coupled digital video input to a DVI/HDMI transmitter Pericom Semiconductor

Other Datasheets by Pericom Semiconductor (now Diodes Incorporated)

Part Number Description
PI3V713-A 7-Channel Analog Video Switch
PI3V712-A 7-Channel Analog Video Switch
PI3V724 1 to 2 VGA Demux
PI3V514 LOW ON RESISTANCE 3.3V HIGH BANDWIDTH 5-PORT 4:1 MUX/DEMUX VIDEOSWITCH
PI3V514B LOW ON RESISTANCE 3.3V HIGH BANDWIDTH 5-PORT 4:1 MUX/DEMUX VIDEOSWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PRELIMINARY INFORMATION, COMPANY CONFIDENTIAL PI3V713 3.3V, 7-Channel Analog Video Switch with Automatic Switching Features • Designed specifically to switch VGA signals • 7-Channels for VGA signals (R,G,B, Hsync, Vsync, DDC Data, and DDC CLK) • Automatic or manual switching supported –Forces re-read of EDID when automatically switching • VDD = 3.3V +/-10% • DDC path will operate as a 5V to 3.3V level shifter • H/V output buffer with +/-24mA drive • ESD tolerance on video I/O pins is up to 12kV HBM per JEDEC standard • -3dB BW of 1.7GHz (typ) • Low Xtalk, (-38dB typ) • Low and Flat ON-STATE resistance (Ron = 4.8-Ohm, Ron(Flat) = 0.5ohm, typ) • Low input/output capacitance (Con = 5.