PI90LV01 Datasheet | Pericom Semiconductor

A product Line of Diodes Incorporated PI90LV01/PI90LVB01 SOTiny LVDS High-Speed Differential Line Driver Features ÎÎMeets or Exceeds ANSI TIA/EIA-644-1955 Standard ÎÎSignaling rates up to 660 Mbps ÎÎBus-Terminal ESD exceeds 2k V ÎÎLow-Voltage Differential Signaling with typical Output Volt- ages of 350m V: yy100-ohm load (PI90LV01) yy50-ohm load (PI90LVB01) ÎÎTypical Propagation Delay Times of 1.5ns ÎÎTypical Power Dissipation of 20m W @200 MHz ÎÎLow-Voltage TTL (LVTTL) Level is 5V Tolerant ÎÎOperates from a 3.3V supply ÎÎExtended Industrial Temperature Operating Range: - 40°C to 105°C ÎÎPackaging (Pb-free & Green available): yy5-pin space-saving SOT23 (T) Description The PI90LV01 and PI90LVB01 are differential line drivers that use low-voltage differential signaling (LVDS) to support data rates up to 660 Mbps. These products are designed for applications requiring high-speed, low-power consumption, low-noise generation, and a small package. The TIA/EIA-644 standard pliant electrical interface provides a minimum differential output voltage magnitude of 247m V into a 100- ohm load and receipt of 100m V signals with up to 1V of ground potential difference between a transmitter and receiver. The PI90LVB01 doubles the output drive current to achieve LVDS levels with a 50-ohm load. A low-voltage TTL/CMOS input level is translated by the device into a low-voltage (350m V) differential output signal. Applications Applications include point-to-point (single termination) and multi-point (double termination) baseband data transmissions over controlled impedance media . The transmission media can be printed circuit board traces, backplanes, or cables. The PI90LV01 and panion line receivers (PI90LV02 and PI90LVT02) provide new alternatives to RS-232, PECL and ECL devices for high-speed, point-to-point interface applications. Pinout Logic Diagram DIN 5 4Y 3Z Function Table Inputs Open Notes: H L X High Z = High = Low =...