Pericom Semiconductor PI2EQX3431
PI2EQX3431 is a low power, signal Re-Driver. The device provides programmable equalization, to optimize performance over a variety of physical mediums by reducing Inter-Symbol Interference. The integrated equalization circuitry provides flexibility with signal integrity of the signal before the re-driver.| Part No. | PI2EQX3431 |
|---|---|
| Datasheet | PI2EQX3431 Download |
| Manufacturer |  Pericom Semiconductor |
| Description | SATA2/SAS Re-Driver |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
● Two 3.2Gbps differential signal pairs Adjustable Receiver Equalization 100-Ohm Differential CML I/O’s Independent Output Level Control Input signal level detect and squelch for each channel OOB Support Low Power (100mW per Channel) Stand-by Mode – Power Down State VCC Operating Range: 1.8V ±0.1V Packaging: — 20-TQFN (3.5x 4.5mm)
DESCRIPTION
Pericom Semiconductor’s PI2EQX3431 is a low power, signal Re-Driver. PI2EQX3431 supports two 100-Ohm Differential CML data I/O’s between the Protocol ASIC to a switch fabric, across a backplane, or to extend the signals across other distant data pathways on the user’s platform. A low-level input signal detection and output squelch function is provided for each channel. Each channel operates fully independantly. When the channels are enabled (CE=1) and operating, that channels input signal level (on xIN+/-) determines whether the output is active. If the input signal level of the channel falls below the active threshold level (Vth-) then the outputs are driven to the common mode voltage.
