Pericom Semiconductor PI2EQX5864
PI2EQX5864 is a low power, PCI-express compliant signal re-driver. The device provides programmable equalization, amplification, and de-emphasis by using 8 select bits, to optimize performance over a variety of physical mediums by reducing Inter-symbol interference. The integrated equalization circuitry provides flexibility with signal integrity of the PCI-express signal before the re-driver, whereas the integrated de-emphasis circuitry provides flexibility with signal integrity of the signal after the re-driver.| Part No. | PI2EQX5864 |
|---|---|
| Datasheet | PI2EQX5864 Download |
| Manufacturer |  Pericom Semiconductor |
| Description | 5.0Gbps 4-Lane PCI Express GenII Re-Driver |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
●
●
● Up to 5.0Gbps PCI Express Gen-2 Serial Re-driver Supporting 8 differential channels or 4 lanes of PCIe Interface I2C configuration controls (3.3V Tolerant) Adjustable receiver equalization and transmitter de-emphasis and output levels Variable input an output termination 1:2 channel broadcast Channel loop-back Electrical Idle fully supported Receiver detect and individual output control Single supply voltage, 1.2V ± 0.05V Power down modes Packaging: 56-contact TQFN, Pb-free & Green
DESCRIPTION
Pericom Semiconductor’s PI2EQX5864 supports eight 100-Ohm Differential CML data I/O’s between the Protocol ASIC to a switch fabric, across a backplane, or extends the signals across other distant data pathways on the user’s platform. In addition to providing signal re-conditioning, Pericom’s PI2EQX5864 also provides power management Stand-by mode operated by a Bus Enable pin. Block Diagram + − xyRx+ xyRx+ − + xxTx+ xxTxInput level detect to control logic Output Con...
