Pericom Semiconductor PI3USB103
The PI3USB103 is a single differential channel 2:1 multiplexer/ demultiplexer USB 2.0 Switch. The device multiplexes differential outputs from a USB Host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs.| Part No. | PI3USB103 |
|---|---|
| Datasheet | PI3USB103 Download |
| Manufacturer |  Pericom Semiconductor |
| Description | USB 2.0 High-Speed (480 Mbps) Signal Switch |
| Buy | Stock & Price |
FEATURES
● USB 2.0 compliant (high speed and full speed)● RON is 3.0Ω typical @ VDD = 3.0V
● Low bit-to-bit skew
● Low Crosstalk: –33dB @ 480 Mbps
● Off Isolation: –30dB @ 480 Mbps
● Near-Zero propagation delay: 250ps
● Channel On Capacitance: 6.0pF (typ)
● VDD Operating Range: 3.0V to 3.6V
● Data pin I/O ESD (pins 1, 2, 4, 5, 6, and 7): ±4kV contact per IEC61000-4-2 spec
● -3dB BW of 1400MHz
● I/O pins have over-voltage protection and can tolerate a short to Vbus
● Packaging (Pb-free & Green): − 10-contact TQFN, 1.3mm x 1.6mm x 0.75mm (ZL10) Application
● Routes signals for USB 2.0
● Hand-held devices
DESCRIPTION
Industry leading advantages include a propagation delay of less than 250ps, resulting from its low channel resistance and I/O capacitance. It is designed for low bit-to-bit skew, high channel-to-channel noise isolation and is compatible with various standards, such as High Speed USB 2.0 (480 Mb/s). The PI3USB103 offers over voltage protection per the USB 2.0 specification. With the chip powered on or off, all I/O pins can withstand a short to Vbus.
