Pericom Semiconductor PI3VDP411LSA
The PI3VDP411LSA converts this AC coupled signal into an HDMI rev 1.3 compliant signal with proper signal swing. This conversion is automatic and transparent to the user. When output channel is enable (OE#=0) and operating, that TMDS pixel clock input signal determines whether the output is enabled.| Part No. | PI3VDP411LSA |
|---|---|
| Datasheet | PI3VDP411LSA Download |
| Manufacturer |  Pericom Semiconductor |
| Description | Dual Mode DisplayPort to DVI/HDMI Electrical bridge |
| Buy | Stock & Price |
FEATURES
ÎÎConverts low-swing AC coupled differential input to HDMI™ rev 1.3 compliant open-drain current steering Rx terminated differential output ÎÎHDMI Level shifting operation up to 2.5Gbps per lane (250MHz pixel clock) ÎÎIntegrated 50-ohm termination resistors for AC-coupled differential inputs. ÎÎProvide Output Squelch function to turn off TMDS common mode output buffer when TMDS clock is not present ÎÎEnable/Disable feature to turn off TMDS outputs to enter low-power state. ÎÎOutput slew rate control on TMDS outputs to minimize EMI ÎÎIntegrated Active / Passive DDC level shifters (3.3V source to 5V sink) ÎÎTransparent operation: no re-timing or configuration required ÎÎLevel shifter for HPD signal from HDMI/DVI connector ÎÎIntegrated pull-down on HPD_SINK input guarantees "input low" when no display is plugged in ÎÎ3.3V Power supply required ÎÎTMDS output enable control ÎÎESD protection on all I/O pins àà 4kV HBM àà ±8kV contact ESD protection on the following pins →→ OUT_Dx± →...
