Pericom Semiconductor PI4MSD5V9545B
The PI4MSD5V9545B is a quad 1-of-4 bidirectional translating switch, controlled via the I2C bus. The SCL/SDA upstream pair fans out to four SCx/SDx downstream pairs, or channels. An active LOW reset input allows the PI4MSD5V9545B to recover from a situation where one of the downstream buses is stuck in a LOW state.| Part No. | PI4MSD5V9545B |
|---|---|
| Datasheet | PI4MSD5V9545B Download |
| Manufacturer |  Pericom Semiconductor |
| Description | 4 Channel I2C bus Switch |
| Buy | Stock & Price |
FEATURES
● 1-of-4 bidirectional translating multiplexer● I2C-bus interface logic;
● Operating power supply voltage :1.65 V to 5.5 V
● Allows voltage level translation between 1.2V,
DESCRIPTION
1.8V,2.5 V, 3.3 V and 5 V buses● Low standby current
● Low Ron switches
● Channel selection via I2C bus
● Power-up with all multiplexer channels deselected
● Capacitance isolation when channel disabled
● No glitch on power-up
● Supports hot insertion
● 5 V tolerant inputs
● 0 Hz to 400 kHz clock frequency
● ESD protection exceeds 8000 V HBM per JESD22- Any individual SCx/SDx channel or combination of channels can be selected, determined by the contents of the programmable control register. Four interrupt inputs, INT0 to INT3, one for each of the downstream pairs, are provided. One interrupt output, INT, acts as an AND of the four interrupt inputs. Pulling the RESET pin LOW resets the I2C bus state machine and causes all the channels to be deselected as does the A114, and 1000 V CDM per JESD22-C101
● Latch-up testing is done to JEDEC Standard internal power-on reset function.
