Pericom Semiconductor PI90LVB048A
The PI90LV048A/PI90LVT048A quad flow-through differential line receivers are designed for applications requiring ultra low-power dissipation and high data rates. The device is designed to support data rates in excess of 500 Mbps (250 MHz) using Low Voltage Differential Signaling (LVDS) technology. The devices accept low-voltage (350 mV typical) differential input signals and translates them to 3V CMOS output levels.| Part No. | PI90LVB048A |
|---|---|
| Datasheet | PI90LVB048A Download |
| Manufacturer |  Pericom Semiconductor |
| Description | LVDS Quad Flow-Through Differential Line Receivers |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
●
●
●
●
●
● 500 Mbps (250 MHz) switching rates Flow-through pinout simplifies PCB layout 150ps channel-to-channel skew (typical) 100ps differential skew (typical) 2.7ns maximum propagation delay 3.3V power supply design High impedance LVDS inputs on power down Low Power design (40mW, 3.3V static) Wide common-mode input voltage range: 0.2V to 2.7V Accepts small swing (350mV typical) differential signal levels Supports open, short and terminated input fail-safe Low-power state when in fail-safe Conforms to ANSI/TIA/EIA-644 Standard Industrial temperature operating range (–40°C to +85°C) Packaging (Pb-free & Green available): - 16-pin SOIC (W) - 16-pin TSSOP (L)
DESCRIPTION
The receiver supports a 3-state function, which may be used to multiplex outputs, and also supports open, shorted and terminated (100-ohms) input failsafe. The receiver output will be HIGH for all fail-safe conditions. PI90LVT048A features integrated parallel termination resistors (nominally 110-ohms) that eliminate the requirement for four discrete termination resistors and reduce stud length.
