Datasheet4U Logo Datasheet4U.com

PLL701-13 - Low EMI Spread Spectrum Multiplier Clock

General Description

The PLL701-13 is a Spread Spectrum Clock Generator designed for the purpose of reducing EMI in high-speed digital systems.

The selectable Down Spread modulation amplitude (see table below) permits EMI reduction without over-clocking the output.

Key Features

  • PIN.

📥 Download Datasheet

Datasheet Details

Part number PLL701-13
Manufacturer PhaseLink
File Size 102.19 KB
Description Low EMI Spread Spectrum Multiplier Clock
Datasheet download datasheet PLL701-13 Datasheet

Other Datasheets by PhaseLink

Part Number Description
PLL701-10 Low EMI Spread Spectrum Multiplier IC
PLL701-11 Low EMI Spread Spectrum Multiplier Clock
PLL701-15 Low EMI Spread Spectrum Multiplier Clock
PLL701-01 (PLL701-01 - PLL701-06) Low EMI Spread Spectrum Multiplier Clock
PLL701-02 (PLL701-01 - PLL701-06) Low EMI Spread Spectrum Multiplier Clock
PLL701-04 (PLL701-01 - PLL701-06) Low EMI Spread Spectrum Multiplier Clock
PLL701-06 (PLL701-01 - PLL701-06) Low EMI Spread Spectrum Multiplier Clock
PLL702-01 Clock Generator
PLL702-02 Low EMI Peripheral Clock Generator
PLL702-03 Low EMI Peripheral Clock Generator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
m PLL701-13 o c . Low EMI Spread Spectrum Multiplier Clock U 4 t e FEATURES PIN CONFIGURATION e h Clock Generator with selectable • Spread Spectrum S multiplier from ta 1x to 4x outputs. • Outputa frequency ranges: 24MHz to 240MHz. • Selectable .D Down Spread Modulation. • TTL/CMOS compatible outputs. w • 3.3V Operating Voltage. w Low short term jitter. w• • Available in 8-Pin 150mil SOIC. FIN 1 2 3 4 8 7 6 5 VDD S3v PLL701-13 S2^ S1^ FOUT GND DESCRIPTIONS The PLL701-13 is a Spread Spectrum Clock Generator designed for the purpose of reducing EMI in high-speed digital systems. The selectable Down Spread modulation amplitude (see table below) permits EMI reduction without over-clocking the output. Any output frequency can be selected by programming 4 multiplier modes.