Philips 74F3038
The 74F3038 is a high current Open-Collector Line Driver composed of four 2-input NAND gates. It has been designed to deal with the transmission line effects of PC boards which appear when fast edge rates are used. The 74F3038 can sink 160mA with a VCC as low as 4.5V.| Part No. | 74F3038 |
|---|---|
| Datasheet | 74F3038 Download |
| Manufacturer |  Philips |
| Description | Quad 2-input NAND 30 ohm line driver |
| Buy | Stock & Price |
FEATURES
● 30Ω line driver● 160mA output drive capability
● High speed
● Facilitates incident wave switching
● 3nh lead inductance each on VCC and GND when both side pins are used PIN CONFIGURATION D0a D0b Q0 GND GND Q1 D1a 1 2 3 4 5 6 7 8 16 15 14 13 12 11 Q3 D3b D3a VCC VCC D2a 10 D2b 9 Q2
DESCRIPTION
This guarantees incident wave switching with VOL not more than 0.8V while driving impedances as low as 30Ω. This is applicable with any combination of outputs using continuous duty. The AC specifications for the 74F3038 were determined using the standard FAST load for open-collector parts of 50pF capacitance, a 500Ω pull-up resistor and a 500Ω pull-down resistor. (See Test Circuit). Reducing the load resistors to 100Ω will decrease the tPLH propagation delay by approximately 50% while increasing tPHL only slightly. The graph of typical propagation delay versus load resistor (see AC Characteristics section for Graph) shows a spline fit curve from four measured data points, RL = 30Ω, RL = 100Ω, RL = 300Ω, and RL = 500Ω.
