Philips 74F3040
The 74F3040 is a high current Line Driver composed of two 4-input NAND gates. It has been designed to deal with the transmission line effects of PC boards which appear when fast edge rates are used. The drive capability of the 74F3040 is 67mA source and 160mA sink with a VCC as low as 4.5V.| Part No. | 74F3040 |
|---|---|
| Datasheet | 74F3040 Download |
| Manufacturer |  Philips |
| Description | Dual 4-input NAND 30 ohm line driver |
| Buy | Stock & Price |
FEATURES
● 30Ω line driver● 160mA output drive capability in the Low state
● 67mA output drive capability in the High state
● High speed
● Facilitates incident wave switching
● 3nh lead inductance each on VCC and GND when both side pins are used PIN CONFIGURATION D0a D0b Q0 GND GND Q1 D1a D1b 1 2 3 4 5 6 7 8 16 15 14 13 12 11 NC D0d D0c VCC VCC D1d 10 D1c 9 NC
DESCRIPTION
This guarantees incident wave switching with VOH not less than 2.0V and VOL not more than 0.8V while driving impedances as low as 30Ω. This is applicable with any combination of outputs using continuous duty. The propagation delay of the part is minimally affected by reflections when terminated only by the TTL inputs of other devices. Performance may be improved by full or partial line termination. TYPE 74F3040 TYPICAL PROPAGATION DELAY 2.0ns SF01362 TYPICAL SUPPLY CURRENT (TOTAL) 10mA ORDERING INFORMATIONDESCRIPTION
16-pin Plastic DIP 16-pin Plastic SOL COMMERCIAL RANGE VCC = 5V ±10%, Tamb = 0°C to +70°C N74F3040N...
