Philips 74F646
The 74F646/74F646A and 74F648/74F648A transceivers/registers consist of bus transceiver circuits with 3–state outputs, D–type flip–flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or the internal registers. The select (SAB, SBA) pins determine whether data is stored or transferred through the device in real–time.| Part No. | 74F646 |
|---|---|
| Datasheet | 74F646 Download |
| Manufacturer |  Philips |
| Description | Octal transceiver/register |
| Buy | Stock & Price |
FEATURES
● Combines 74F245 and two 74F374 type functions in one chip● High impedance base inputs for reduced loading (70µA in high and low states)
DESCRIPTION
Data on the A or B bus will be clocked into the registers as the appropriate clock pin goes high. Output enable (OE) and DIR pins are provided to control the transceiver function. In the transceiver mode, data present at the high impedance port may be stored in either the A or B register or both. The DIR determines which bus will receive data when the OE is active low. In the isolation mode (OE = high), data from bus A may be stored in the B register and/or data from bus B may be stored in the A register. When an output function is disabled, the input function is still enabled and may be used to store and transmit data. Only one of the two buses, A or B may be driven at a time.● Independent registers for A and B buses
● Multiplexed real-time and stored data
● Choice of non-inverting and inverting data paths
● Controlled ramp ou...
