HD4845 Datasheet | Philips Semiconductors

English 1a To operate the appliance, plug the toaster into the mains socket and slide the switch downwards. Please note: The switch will only stay in the down position if the appliance is connected to the mains! Important - Attention: The toaster gets hot during use. Avoid touching the metal parts. - If a slice of bread bees trapped inside the toaster: - remove the plug from the mains socket; - then remove the trapped slice carefully from the toaster. Take care not to damage the heating elements whilst removing the bread. Never use a metal object for this purpose. - Bread may burn. Therefore, toasters must not be used near or below curtains or other bustible material. They must be watched. - Do not place any objects or heat-up buns directly on top of the toaster as this could lead to damage. - When cleaning the toaster: - First remove the plug from the mains socket. - Never immerse the toaster in water. Wipe it clean with a damp cloth. - If the mains cord of this appliance is damaged, it must be replaced by Philips or their service representative, as special tools and/or parts are required. Operation (see illustrations): Your toaster is equipped with a O position on the browning selector. When in this position, the toast lever will not engage and will pop up. We remend you leave your browning selector in the O position when not in use. This will ensure a measure of safety by preventing accidental turning on of the toaster (e.g. by young children). - (Type HD 4815:) Insert one or two slices of bread (fig. 1a). - (Type HD 4845:) Insert one to four slices (or two large slices) of bread. For optimum browning, always place the bread as close as possible to the centre of the slots (fig. 1b). - Before switching on, select the degree of browning (fig. 2). - Select a lower position (i.e. 1 or 2) for light browning, for toasting only one slice or for dry bread. - For medium browning set the browning selector to position 3-5. - Select a higher position (i.e. 6 or 7) for...