Philips NE5537D
The NE5537 monolithic sample-and-hold amplifier combines the best features of ion-implanted JFETs with bipolar devices to obtain high accuracy, fast acquisition time, and low droop rate. This device is pin-compatible with the LF198, and features superior performance in droop rate and output drive capability. The circuit shown in Figure 1 contains two operational amplifiers which function as a unity gain amplifier in the sample mode.| Part No. | NE5537D |
|---|---|
| Datasheet | NE5537D Download |
| Manufacturer |  Philips |
| Description | Sample-and-hold amplifier |
| Buy | Stock & Price |
DESCRIPTION
The first amplifier has bipolar input transistors which give the system a low offset voltage. The second amplifier has JFET input transistors to achieve low leakage current from the hold capacitor. A unique circuit design for leakage current cancellation using current mirrors gives the NE5537 a low droop rate at higher temperature. The output stage has the capability to drive a 2kΩ load. The logic input is compatible with TTL, PMOS or CMOS logic. The differential logic threshold is 1.4V with the sample mode occurring when the logic input is high. It is available in 8-lead TO-5, 8-pin plastic DIP packages, and 14-pin SO packages. PIN CONFIGURATIONS FE and N Packages V+ 1 OFFSET ADJUST 2 INPUT 3 V– 4 8 7 6 5 LOGIC LOGIC REFERENCE Ch OUTPUT D1 Package INPUT NC V– NC NC 1 2 3 4 5 6 7 14 V OS ADJ 13 NC 12 V+ 11 LOGIC 10 LOGIC REFERENCE 9 8 NC ChFEATURES
NC OUTPUT● Operates from ±5V to ±18V supplies
● Hold leakage current 6pA @ TJ = 25°C
● Less than 4µs acquisition time
● TTL,...
