Datasheet4U Logo Datasheet4U.com

SA601 - Low voltage LNA and mixer - 1GHz

General Description

The SA601 is a combined RF amplifier and mixer designed for high-performance low-power communication systems from 800-1200MHz.

The low-noise preamplifier has a 1.6dB noise figure at 900MHz with 11.5dB gain and an IP3 intercept of -2dBm at the input.

Key Features

  • Low current consumption: 7.4mA nominal, 4.4mA with the mixer powered-down GND 8 LOIN1 9 LOIN2 10.
  • Outstanding LNA noise figure: 1.6dB at 900MHz.
  • High system power gain: 18dB (LNA + Mixer) at 900MHz.
  • Excellent gain stability versus temperature and supply voltage.
  • External >-7dBm LO can be used to drive the mixer.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SA60 AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSORS MIC
SA60 Transient Voltage Suppression (TVS) Diodes Crydom
SA60 Transient Voltage Suppressors Microsemi
SA60 TRANSIENT VOLTAGE SUPPRESSORS Digitron Semiconductors
SA60 Transient Voltage Suppressors Crownpo

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
SA602 Double-Balanced Mixer and Oscillator
SA605 High performance low power mixer FM IF system
SA606 Low-voltage high performance mixer FM IF system
SA607 Low-voltage high performance mixer FM IF system
SA608 Low voltage high performance mixer FM IF system

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Philips Semiconductors RF Communications Products Product specification Low voltage LNA and mixer - 1GHz SA601 DESCRIPTION The SA601 is a combined RF amplifier and mixer designed for high-performance low-power communication systems from 800-1200MHz. The low-noise preamplifier has a 1.6dB noise figure at 900MHz with 11.5dB gain and an IP3 intercept of -2dBm at the input. The gain is stabilized by on-chip compensation to vary less than ±0.2dB over -40 to +85°C temperature range. The wide-dynamic-range mixer has a 9.5dB noise figure and IP3 of –2dBm at the input at 900MHz. The nominal current drawn from a single 3V supply is 7.4mA. The Mixer can be powered down to further reduce the supply current to 4.4mA.