SAA3008 - Infrared remote control transmitter RECS 80 low voltage

Product Overview

Philips

Datasheet Details

Part number	SAA3008
Manufacturer	Philips
File Size	110.88 KB
Description	Infrared remote control transmitter RECS 80 low voltage
Datasheet	SAA3008 Datasheet
Additional preview pages of the SAA3008 datasheet.

Product details

Description

SAA3008 The SAA3008 transmitter IC is designed for infrared remote control systems.It has a capacity for 1280 commands arranged in 20 sub-system address groups of 64 commands each.The subsystem address may be selected by press-button, slider switches or be hard-wired.Commands are transmitted in patterns which are pulse distance coded.Modulated pulse transmissions allow a narrow-band receiver to be used for improved noise rejection.The modulation frequency of the SAA3008 is 38 kHz which is

Features

Modulated transmission.
Ceramic resonator controlled frequency.
Data-word-start with reference time of unique start pattern.
Supply voltage range 2 V to 6.5 V.
40 mA output current capability.
Very low standby current (< 4 µA at VDD = 6 V).
Up to 20 subsystem address groups; up to 1280 commands.
Up to 64 commands per subsystem address; up to 1280 commands.
Requires few additional components.

📁 Similar Datasheet

SAA3006 - Low Voltage Infrared Remote Control Transmitter (Signetics)
SAA3007 - INFRARED REMOTE CONTROL TRANSMITTER (NXP)
SAA3009 - (SAA3009 / SAA3049) Infrared Remote Control Decoders (ETC)
SAA3028 - Infrared Remote Control Transcoder (ETC)
SAA3049 - (SAA3009 / SAA3049) Infrared Remote Control Decoders (ETC)
SAA32M8 - DDR2 SDRAM (SpecTek)
SAA-311100 - Single-Mode FC D-Shape ADAPTOR supplied (Seiko Instruments Inc)
SAA-C505CA-4RC - 8-bit Single-Chip Microcontroller (Bare Die Delivery) (Infineon Technologies AG)

Other Datasheets by Philips

SAA3004 - Remote control transmitter
SAA3010 - Infrared remote control transmitter RC-5
SAA3027 - INFRARED REMOTE CONTROL TRANSMITTER
SAA3049 - Infrared remote control decoder
SAA3049A - Infrared remote control decoder
SAA3323 - Drive processor for DCC systems

Published: May 18, 2005 |