Datasheet4U Logo Datasheet4U.com

TDA10023HT - Single chip DVB-C/MCNS channel receiver

General Description

The TDA10023HT is a single chip DVB-C/MCNS channel receiver for 4, 16, 32, 64, 128 and 256-QAM modulated signals.

The device interfaces directly to the IF signal, which is sampled by a 10-bit A/D converter.

The TDA10023HT performs the clock and the carrier recovery functions.

Key Features

  • s s s s s s s s s 4,16, 32, 64, 128 and 256 QAM demodulator (ITU-T J.83 annex A-B and C compatible) High performance for 256 QAM especially for direct IF.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA10021HT DVB-C channel receiver NXP
TDA10025HN Dual cable demodulator NXP
TDA1002A Recording and Playback Amplifier ETC
TDA1001B Interference and noise suppression circuit for FM receivers NXP
TDA1001BT Interference and noise suppression circuit for FM receivers NXP

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
TDA1003A Motor Regulator and Bias/Erase Oscillator Circuit
TDA10046HT Single-Chip DVB-T Channel Decoder
TDA1023 Proportional-control triac
TDA1024 A MAINS-ZERO TRIAC-TRIGGERING
TDA1034 OPERATIONAL AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com TDA10023HT Single chip DVB-C/MCNS channel receiver Rev. 01 — 12 April 2005 Product data sheet 1. General description The TDA10023HT is a single chip DVB-C/MCNS channel receiver for 4, 16, 32, 64, 128 and 256-QAM modulated signals. The device interfaces directly to the IF signal, which is sampled by a 10-bit A/D converter. The TDA10023HT performs the clock and the carrier recovery functions. The digital loop filters for both clock and carrier recovery are programmable in order to optimize their characteristics according to the current application. After baseband conversion, equalization filters are used for echo cancellation in cable applications.