Datasheet4U Logo Datasheet4U.com

TDA1510A - 24W BTL or 2 x 12W stereo car radio power amplifier

This page provides the datasheet information for the TDA1510A, a member of the TDA1510 24W BTL or 2 x 12W stereo car radio power amplifier family.

Description

The TDA 151 O/TDA 151 OA is a class-B integrated output amplifier encapsulated in a 13-lead single in-line (SI Ll plastic power package.

Developed primarily for car radio application, the device can also be used to drive low impedance loads (down to 1,6 nl.

Features

  • Flexibility - stereo as well as mono BTL.
  • Low offset voltage at the output (important for BTU.
  • Load dump protection.
  • A. C. short-circuit-safe to ground.
  • Low number, small sized external components.
  • Internal limiting of bandwidth for high frequencies.
  • High output power.
  • Large useable gain variation.
  • Good ripple rejection.
  • Thermal protection.
  • Low stand-by current possibility.
  • High reliabili.

📥 Download Datasheet

Datasheet preview – TDA1510A

📁 Similar Datasheet

  • TDA1510AQ - 24 W BTL or 2 x 12 W stereo car radio power amplifier (NXP)
  • TDA1512A - 12W TO 20W HI FI AUDIO POWER AMPLIFIER (ETC)
  • TDA1512AQ - 12W TO 20W HI FI AUDIO POWER AMPLIFIER (ETC)
  • TDA1514A - 50 W high performance hi-fi amplifier (NXP)
  • TDA1515BQ - 24 W BTL or 2 x 12 W stereo car radio power amplifier (NXP)
  • TDA1516BQ - 24 W BTL or 2 x 12 watt stereo car radio power amplifier (NXP)
  • TDA1516CQ - 24 W BTL car radio power amplifier (NXP)
  • TDA1517 - 2 x 6W stereo power amplifier (NXP)
  • TDA1517ATW - 8 W BTL or 2 x 4 W SE power amplifier (NXP)
  • TDA1517P - 2 x 6W stereo power amplifier (NXP)
Other Datasheets by Philips
  • TDA1510 - 24W BTL or 2 x 12W stereo car radio power amplifier
  • TDA1520A - 20W Hi-Fi Audio Amplifier
  • TDA1543A - Dual 16-bit DAC
  • TDA1544 - Dual 16-Bit Low Noise DAC
  • TDA1562SD - 70W high efficiency power amplifier
  • TDA1562ST - 70W high efficiency power amplifier
  • TDA10023HT - Single chip DVB-C/MCNS channel receiver
  • TDA1003A - Motor Regulator and Bias/Erase Oscillator Circuit

Full PDF Text Transcription

Click to expand full text
TDA1510 TDA1510A 24 W BTL OR 2 x 12 W STEREO CAR RADIO POWER AMPLIFIER GENERAL DESCRIPTION The TDA 151 O/TDA 151 OA is a class-B integrated output amplifier encapsulated in a 13-lead single in-line (SI Ll plastic power package. Developed primarily for car radio application, the device can also be used to drive low impedance loads (down to 1,6 nl. With a supply voltage (Vpl of 14,4 V, an output power of 24 W can be delivered into a 4 n Bridge Tied Load (BTL), or when used as a stereo amplifier, 2 x 12 W into 2 n or 2 x 7 W into 4 n. Features • Flexibility - stereo as well as mono BTL • Low offset voltage at the output (important for BTU • Load dump protection • A.C.
Published: |